Arofanatics Fish Talk Forums  

Go Back   Arofanatics Fish Talk Forums > General Aquatic Forums > Freshwater Invertebrates Forum

Reply
 
Thread Tools Display Modes
Old 14-03-2008, 04:48 PM   #1
nbs
Guest
 
Posts: n/a
Default Factors that affect the reproduction rate of CRS

Dear all,

Need your advice on possible factors that affect the reproduction rate of CRS.

I have a heavily planted tank with around 50 pcs of CRS. Very few offsprings for the past six months. The following are my setup.

Tank: 4ft by 1.5 ft
Substrate: ADA Amazonia (approximately 1.5 inches thick)
Plants: Seaweed (Coral Pelia ?? not sure of the name) Covering 90% of the tank's floor and backwall
Food: Pellet food from Shirakura (feed twice daily)
Chiller 24.5 degree
2 sponge filters (air pump - quite strong current)
CO2 approximately 30 bubbles per min
PH - 6.2 - 6.7
2 T5 lights switch on 6 to 8 hours per day
2x2028 Eheim filters (sponge, ceramic rings and eheim substrates)
White Powder and Microorganism powder added daily
Liquid Minerals added weekly.
20% Partial Water change weekly(Aged water)

There are no casualties in my tank but they are not productive.

Hope you can enlighten me of factors that may affect the production rate

Thanks
Regards
Nbs
  Reply With Quote
Old 14-03-2008, 07:22 PM   #2
winq
Guest
 
Posts: n/a
Default

maybe they r more male than female?
  Reply With Quote
Old 14-03-2008, 08:28 PM   #3
silane
Senior Dragon
 
silane's Avatar
 
Join Date: Jul 2004
Posts: 4,136
Default

Quote:
Originally Posted by nbs View Post
Dear all,

Need your advice on possible factors that affect the reproduction rate of CRS.

I have a heavily planted tank with around 50 pcs of CRS. Very few offsprings for the past six months. The following are my setup.

Tank: 4ft by 1.5 ft
Substrate: ADA Amazonia (approximately 1.5 inches thick)
Plants: Seaweed (Coral Pelia ?? not sure of the name) Covering 90% of the tank's floor and backwall
Food: Pellet food from Shirakura (feed twice daily)
Chiller 24.5 degree
2 sponge filters (air pump - quite strong current)
CO2 approximately 30 bubbles per min
PH - 6.2 - 6.7
2 T5 lights switch on 6 to 8 hours per day
2x2028 Eheim filters (sponge, ceramic rings and eheim substrates)
White Powder and Microorganism powder added daily
Liquid Minerals added weekly.
20% Partial Water change weekly(Aged water)

There are no casualties in my tank but they are not productive.

Hope you can enlighten me of factors that may affect the production rate

Thanks
Regards
Nbs

Temperature is the main factor, it seems that your temperature is ok. Or your themometer is out?
silane is offline   Reply With Quote
Old 14-03-2008, 11:09 PM   #4
nbs
Guest
 
Posts: n/a
Default

I will double check the temperature. Using TECO chiller(just brought last year). Thanks.
  Reply With Quote
Old 14-03-2008, 11:25 PM   #5
nbx
Guest
 
Posts: n/a
Default

For me, strong turbulence of my sponge filter does not work well with crs. Ill try tuning down the aeration frequency to minimize distractions for the shrimps.
  Reply With Quote
Old 15-03-2008, 02:15 PM   #6
TCL
Guest
 
Posts: n/a
Default

Mine has the same issue with you previously, but once I adjusted the temp from 23'C to 25'C, and the pH from 6.4 to 6.6. They start to get pregnant.
  Reply With Quote
Old 15-03-2008, 02:53 PM   #7
winq
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by TCL View Post
Mine has the same issue with you previously, but once I adjusted the temp from 23'C to 25'C, and the pH from 6.4 to 6.6. They start to get pregnant.
ehh.. does tat means they will not get pregnant if the temp is too cold?
  Reply With Quote
Old 15-03-2008, 03:13 PM   #8
TCL
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by winq View Post
ehh.. does tat means they will not get pregnant if the temp is too cold?
I can't answer you as I am trying to find out more too. Some bros had CRS pregnant in 23'C, just take longer time to breedout.

I just trying out all ways after they stop producing for more than 2 months. But start to get pregnant after the changes.
  Reply With Quote
Old 15-03-2008, 04:02 PM   #9
winq
Guest
 
Posts: n/a
Default

wah abit tricky.. any old birds here can help explain to newbie like me?.. thanks a millions...
  Reply With Quote
Old 16-03-2008, 12:59 AM   #10
bbpippen
Guest
 
Posts: n/a
Default

ideally i think the temp shd be set at 25degree. temperature as wat bro silane mentioned is the most critical factor for breeding.

yes and i do agree that the breedout period is fairly longer wif lower temperature. do correct mi if im wrong.
we're all learning
  Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +9. The time now is 03:21 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright © 2000-2008 Arofanatics.com (Since 30th August 2000)