Dupla CO2 S Reactor

15-11-2004, 12:46 AM

Hi Guys!

I just got this CO2 reactor but had no clue as to the piping setup.

Both the in/outlet are 9/12mm and Eheim does not produce such sizes anymore.

Can anyone share your current setup for such CO2 reactor or any other reactors with similar hose size.

Thanks.

17-11-2004, 03:33 PM

It's not necessary to use Eheim tubes.

Take the joints down to a hardware store (depending on where you live) and ask for a suitable rubber tube. You'll be pleasantly surprised at the cost savings.

17-11-2004, 04:43 PM

Thanks. Will try that.

Kind Regards.

15-11-2004, 12:46 AM	#1
platyfanatic Guest Posts: n/a	Dupla CO2 S Reactor Hi Guys! I just got this CO2 reactor but had no clue as to the piping setup. Both the in/outlet are 9/12mm and Eheim does not produce such sizes anymore. Can anyone share your current setup for such CO2 reactor or any other reactors with similar hose size. Thanks.

17-11-2004, 03:33 PM	#2
talev Guest Posts: n/a	It's not necessary to use Eheim tubes. Take the joints down to a hardware store (depending on where you live) and ask for a suitable rubber tube. You'll be pleasantly surprised at the cost savings.

17-11-2004, 04:43 PM	#3
platyfanatic Guest Posts: n/a	Thanks. Will try that. Kind Regards.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)