Chiller for a 4x2x2.5

Originally Posted by Ekia

nim75sg is using a 1/3hp to cool his 6ft tank with all his equipments running with no problems at all.... 1/3hp is more than enough to cool monsterz's 4x2.5x2.5

maybe shd ask him how long it takes the chiller 2 cool his tk by 2 degrees.

anyway, monster is using MH. it's gonna b so much hotter than T5s.

Originally Posted by devilfire

maybe shd ask him how long it takes the chiller 2 cool his tk by 2 degrees.

anyway, monster is using MH. it's gonna b so much hotter than T5s.

wait for his comments

Originally Posted by devilfire

hi monster, jeff contacted me today on ur behalf.

i assume a 1/3hp daeil is the same as an arctica 1/3hp. i consulted some of my frens, n they based on the specs given n i had oso gone thru it, the chiller can cool up 2 a vol of 1200++Litres without any equipment running.

now, tis was wat they told me n i am not sure on tis part. wif the max allowable of heat generated, the chiller can oni cool up 2 a vol of 400++Litres.
they told me they saw it on the box itself or the pamplets, i not too sure.

if u plan 2 get a daeil, suggest tat u go 4 a higher hp.

BTW, wat's the price of a 1/3 hp?

Cos i heard that PC chiller is not bad too,1/2hp some more. Bro devilfire can let me know thw L/H/W cos i don know if it can fit into my space.

Originally Posted by monsterz1975

Cos i heard that PC chiller is not bad too,1/2hp some more. Bro devilfire can let me know thw L/H/W cos i don know if it can fit into my space.

i tot u gonna place it near the window?

anyway, i'm shall not influence u on ur choice. there r always good n bad. 1 noted difference between the 2 is the heat exchanger tubing material. 1 PC stresses on performance n arctica stresses on durability.

wat's the price of the 1/3 hp??

Originally Posted by devilfire

i tot u gonna place it near the window?

anyway, i'm shall not influence u on ur choice. there r always good n bad. 1 noted difference between the 2 is the heat exchanger tubing material. 1 PC stresses on performance n arctica stresses on durability.

wat's the price of the 1/3 hp??

Now don know the daeli can fit into the empth space or not still waitting for reply , the chiller cost about $1600.Bro devilfire caan let me know the L/w/H?

Originally Posted by nim75sg

Since you are planning to buy the Daeil, take a visit to this url to size your chiller requirements:

http://www.jbjlighting.com/prod_chiller.html

Have fun ....

Thanks bro nim, i try out the chart and it tell me a 1/3hp is good enough for my tank.

the arctica looks rather small 2 me. if the arctica cant fit in, i dun think the PC would.

anyway, here's the dimension: 18.25"X14"X17.5".

a lot of reefers dun trust local products n usually it will take a few years 4 them 2 make a name.

but dun b surprise there r more reefers using these local products than u can imagine.

anyway, if u change ur mind n decided 2 go 4 PC, u can always SMS/call me. i'll strike out a good deal 4 u.

BTW, a reefer here is oso using PC n he told me tat he was damn happy wif it.

Originally Posted by devilfire

the arctica looks rather small 2 me. if the arctica cant fit in, i dun think the PC would.

anyway, here's the dimension: 18.25"X14"X17.5".

a lot of reefers dun trust local products n usually it will take a few years 4 them 2 make a name.

but dun b surprise there r more reefers using these local products than u can imagine.

anyway, if u change ur mind n decided 2 go 4 PC, u can always SMS/call me. i'll strike out a good deal 4 u.

BTW, a reefer here is oso using PC n he told me tat he was damn happy wif it.

Bro how wide is that? 14"(from the front L to R )?

Originally Posted by monsterz1975

Bro how wide is that? 14"(from the front L to R )?

huh?? dun understand

Originally Posted by devilfire

huh?? dun understand

From the front view of ur chiller from left to right.