Connecting Chillers

15-10-2004, 05:52 PM

Dear bros,

I just bought a chiller. My problem comes at the connection to the cannister. It seems that the cannister inlet is large tubing, and outlet is small tubing. But both inlet/outlet of my chiller is large tubing; how do I connect my small tubing from cannister outlet to my large tubing chiller inlet?

Is there a connector for this?

Appreciate your help

15-10-2004, 06:11 PM

Yes, you can check the LFS. That's a connector that doing that.

15-10-2004, 06:26 PM

some hardware shop will hav the reducer/adaptor

15-10-2004, 07:41 PM

It sounds like your chiller doesn't provide the different hose size adaptors ... suggest you visit hardware shops or LFS to purchase the right adaptor.

15-10-2004, 05:52 PM	#1
XpErIEnCe Guest Posts: n/a	Connecting Chillers Dear bros, I just bought a chiller. My problem comes at the connection to the cannister. It seems that the cannister inlet is large tubing, and outlet is small tubing. But both inlet/outlet of my chiller is large tubing; how do I connect my small tubing from cannister outlet to my large tubing chiller inlet? Is there a connector for this? Appreciate your help

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

15-10-2004, 06:11 PM	#2
cwloo Guest Posts: n/a	Yes, you can check the LFS. That's a connector that doing that.

15-10-2004, 06:26 PM	#3
devilfire Guest Posts: n/a	some hardware shop will hav the reducer/adaptor

15-10-2004, 07:41 PM	#4
nim75sg Guest Posts: n/a	It sounds like your chiller doesn't provide the different hose size adaptors ... suggest you visit hardware shops or LFS to purchase the right adaptor.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)