help me choose a skimmer pls.. - Page 2

14-10-2004, 07:24 PM

maybe i can share wif u something on AquaC.

-insump or outsump
-quiet operation
-does not need a pressure rated pump n does not need a needle wheel pump.
(plus pt is when pumps breaks down u can grab any pump)
-easy maintenance(oni need 2 clean the nozzle once in a while. nozzle easy 2 remove, juz unscrew)
-tuning the skimmer needs patience
-gives good quality n quantity skimmate
-collection cup n cover very easy 2 remove 4 cleaning.

err, wat else??

14-10-2004, 09:35 PM

Macro
AS-150P $11x (600L)
AS-200P $14x ... (800L)
can't remember the last figure.

14-10-2004, 09:43 PM

decent kid, someone from src(hermit) has done diy & gotten good result!

14-10-2004, 09:54 PM

Quote:

Originally Posted by nicky30092002

decent kid, someone from src(hermit) has done diy & gotten good result!

Bro, you refer to the mod on macro ??

15-10-2004, 06:30 PM

hmm so can this MArco needwheel be hung on the tank as i dun have a sump. Pls advise

15-10-2004, 06:46 PM

Quote:

Originally Posted by iori_del

hmm so can this MArco needwheel be hung on the tank as i dun have a sump. Pls advise

yes it can...

15-10-2004, 06:49 PM

Quote:

Originally Posted by Ekia

that thread is not only between aqua-medic and beckett.. its mainly between needle-wheel and beckett...

What kind of skimmer u looking for? Beckett, needlewheel or spray injection? My turboflotor multi sl also rated for 1000l.. haha.. the license to over-load

u also dunno what type to get...

needlewheel: very small bubbles
beckett: good but very power consuming...so i dont intend to use one
spray injection: just like what bro devil fire said

so now i am between a spray injection and needlewheel...

15-10-2004, 07:50 PM

Quote:

Originally Posted by decentkid

u also dunno what type to get...

needlewheel: very small bubbles
beckett: good but very power consuming...so i dont intend to use one
spray injection: just like what bro devil fire said

so now i am between a spray injection and needlewheel...

spray injection will require slightly higher wattage pumps than needlewheel... but less than beckett though...

the needlewheel may need to be replaced though... make sure u get a needlewheel skimmer that can have the parts easily available...

16-10-2004, 01:09 AM

ermz...guys...help me clarify some things...

h&s is needlewheel
macro is needlewheel and venturi
aquac is spray injection???
aqua medic is ???

anymore other brands i missed out?

16-10-2004, 01:36 AM

we find venturi in skimmers n needle wheel in pump.

HnS is venturi type skimmers n its aquabee is needle wheel type pump.

same goes 2 the new batch of macro.'

aquamedic is no different.

AquaC uses a pump of wattage rating of 35-45W. depending which model.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

14-10-2004, 07:24 PM	#11
devilfire Guest Posts: n/a	maybe i can share wif u something on AquaC. -insump or outsump -quiet operation -does not need a pressure rated pump n does not need a needle wheel pump. (plus pt is when pumps breaks down u can grab any pump) -easy maintenance(oni need 2 clean the nozzle once in a while. nozzle easy 2 remove, juz unscrew) -tuning the skimmer needs patience -gives good quality n quantity skimmate -collection cup n cover very easy 2 remove 4 cleaning. err, wat else??

14-10-2004, 09:35 PM	#12
cwloo Guest Posts: n/a	Macro AS-150P $11x (600L) AS-200P $14x ... (800L) can't remember the last figure.

14-10-2004, 09:43 PM	#13
nicky30092002 Guest Posts: n/a	decent kid, someone from src(hermit) has done diy & gotten good result!

15-10-2004, 06:30 PM	#15
iori_del Guest Posts: n/a	hmm so can this MArco needwheel be hung on the tank as i dun have a sump. Pls advise

16-10-2004, 01:09 AM	#19
decentkid Guest Posts: n/a	ermz...guys...help me clarify some things... h&s is needlewheel macro is needlewheel and venturi aquac is spray injection??? aqua medic is ??? anymore other brands i missed out?

16-10-2004, 01:36 AM	#20
devilfire Guest Posts: n/a	we find venturi in skimmers n needle wheel in pump. HnS is venturi type skimmers n its aquabee is needle wheel type pump. same goes 2 the new batch of macro.' aquamedic is no different. AquaC uses a pump of wattage rating of 35-45W. depending which model.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)