sudden breakdown Hailea chiller HC-150

[spiderman_123]

Originally Posted by Scruffling

For china chiller fan is 1st to spoil. thermostat is already not as efficient to begin with. If you have placed ur chiller air outflow against the wall, most prob ur fan died or something inside overheated. the latter is a gone case.

is it true,bro. i recently shift my chiller position.but the air outflow space not so close to wall.still got maybe at least 10cm. bro,what if fan died,will it costly to repair or replace new fan? now scare something overheated.will try on tomorrow and try again.currently off

[numbskull]

Originally Posted by spiderman_123

is it true,bro. i recently shift my chiller position.but the air outflow space not so close to wall.still got maybe at least 10cm. bro,what if fan died,will it costly to repair or replace new fan? now scare something overheated.will try on tomorrow and try again.currently off

Bro mines set at 24 degree but cant chill it down. Eventhough it chills (can hear motor and stuff inside running) for less than 5 mins, it can only chill down .1 or .2 degrees. then it will run without the motor sound for 10 to 15 mins and the 3 mins cooldown period. Overnight my temp can go up 2 degrees.What i am doing now is that i place a fan (those silver metallic round table fan around 30cm) at the front grill and blow in 24/7. That helps my water temp to cooldown to my 24 degrees for now.

If i am not mistaken hc150 has the fan blowing inward. which is for fridges. Minimal to have 1ft of space. best is to avoid putting it against a wall. If you can, open up the chiller casing should expose the fan, its the big type. then power the chiller on. When it starts up the fan should start immediately. fan replacement is within your stated budget. can be brought to biotope to ask them to assess or can source yourself. But the root problem is unclear. My gut is that the fan is faulty. It is the no 1 killer of chillers.

If your chiller is ~5 yrs usage there is high chance not only the fan is spoilt.
refer to this http://www.aquaticquotient.com/forum...ad.php?t=65446

[spiderman_123]

[QUOTE=Scruffling;7609142]If i am not mistaken hc150 has the fan blowing inward. which is for fridges. Minimal to have 1ft of space. best is to avoid putting it against a wall. If you can, open up the chiller casing should expose the fan, its the big type. then power the chiller on. When it starts up the fan should start immediately. fan replacement is within your stated budget. can be brought to biotope to ask them to assess or can source yourself. But the root problem is unclear. My gut is that the fan is faulty. It is the no 1 killer of chillers.

thanks bro. u means marsiling biotope?me suspect fan too.but before the fan got this condenser.seems need remove this part before can access fan. bro any idea will no gas cause this problem too or cause fan wont move? thought mayb cheaper repair then

[spiderman_123]

Originally Posted by numbskull

Bro mines set at 24 degree but cant chill it down. Eventhough it chills (can hear motor and stuff inside running) for less than 5 mins, it can only chill down .1 or .2 degrees. then it will run without the motor sound for 10 to 15 mins and the 3 mins cooldown period. Overnight my temp can go up 2 degrees.What i am doing now is that i place a fan (those silver metallic round table fan around 30cm) at the front grill and blow in 24/7. That helps my water temp to cooldown to my 24 degrees for now.

that bad bro.like this means u need on fan and chiller together.extra electric charge.since now 24,have u try off the fan and see will the chiller temp maintain at 24.

Sorry was bioplast off Boon Keng rd. If no gas, there will be no warm air at output

[spiderman_123]

Originally Posted by Scruffling

Sorry was bioplast off Boon Keng rd. If no gas, there will be no warm air at output

thanks bro.but it far from my place(north area woodland). any idea north area got place where provide chiller repair or service and price reasonable.tq

[spiderman_123]

hi,
any bros who recently has sent chiller for repair,able to recommend where,who? possibel not far from north area. search and found those threads on chiller repair seems sometimes far back,so wonder the nos stil valid. thanks

Can contact chilldown or derek not sure if he still does servicing have pmed you their contacts