New wave maker

Heard abt the SEIO new wavemake but not sure if they would launch it in Aquarama Singapore 05. As it was place on hold even in USA :P

[BarraCuda™]

Its not by RIO also

hmmm... any hints? :P

Originally Posted by BarraCuda™

Same theory as the wave box (resonance) but its not by tunze

However, you will need a high flow controllable stream to do this. I will call it a mod.

Hummmm....so you need a controllable stream to us it???? no wonder you hunting high and low for a 6100.....

anyway, would the cost of this mod +tunze stream adds up to be higher then if we just purchase a new wavebox????

[BarraCuda™]

Originally Posted by tineng

Hummmm....so you need a controllable stream to us it???? no wonder you hunting high and low for a 6100.....

anyway, would the cost of this mod +tunze stream adds up to be higher then if we just purchase a new wavebox????

not really, I'm operating this on a 6000

www.tun

Originally Posted by BarraCuda™

not really, I'm operating this on a 6000

let me guess ..
1. You are using Tunze 6000
2. The Tunze is running on DC motor, which can withstand on/off without damanging the pump.

Conclusion: You custom made a wave box, similar to the Tunze wave box, put in the Tunze 6000, build a electronic control to control the on/off of the pump , so it work as the same theory of Tunze wave box, am I right ?

[BarraCuda™]

Originally Posted by cwloo

www.tun

let me guess ..
1. You are using Tunze 6000
2. The Tunze is running on DC motor, which can withstand on/off without damanging the pump.

Conclusion: You custom made a wave box, similar to the Tunze wave box, put in the Tunze 6000, build a electronic control to control the on/off of the pump , so it work as the same theory of Tunze wave box, am I right ?

Fundamentally correct but you missed out a critical portion. Calculation of the resonance and its not a simple on/off controller. You can never do this with the 7091 controller.

Originally Posted by BarraCuda™

Fundamentally correct but you missed out a critical portion. Calculation of the resonance and its not a simple on/off controller. You can never do this with the 7091 controller.

hehehe....or you can search for the schemic online.....just go google and type "wavebox diy".....go through some of the pages to find the circuit.....

me too lazy to diy....maybe will pay one of those shops in SLT or get a student to help me.....:P

well, anyway, well done Barracuda for taking the effort to try it out....you must have definately need to experiment in order to get this right.....

[BarraCuda™]

Originally Posted by tineng

hehehe....or you can search for the schemic online.....just go google and type "wavebox diy".....go through some of the pages to find the circuit.....

me too lazy to diy....maybe will pay one of those shops in SLT or get a student to help me.....:P

well, anyway, well done Barracuda for taking the effort to try it out....you must have definately need to experiment in order to get this right.....

No harm trying, good luck on tuning it!

Originally Posted by BarraCuda™

No harm trying, good luck on tuning it!

nah.....too lazy/buzy to try.....but on another hand, wonder if i just dump one of my stream into a box and then use the multi controller in sequencing mode, wonder if the frequency provided in that mode will allow the system to work...