|
|
14-05-2006, 01:13 AM | #1 |
Guest
Posts: n/a
|
New creation - Micro chiller
Need more comments, anything else to upgrade???
1. Dolphin 300L - Hang On Filter 2. Max cooling - 85W Peltier 3. 6061 Aluminium cooling plate 3. Car Themostat - 12V |
14-05-2006, 03:41 AM | #2 |
Arofanatic
Join Date: Jan 2004
Posts: 453
|
very nicely DIY micro chiller joe bro! How much did it cost u?
|
14-05-2006, 06:59 AM | #3 |
Guest
Posts: n/a
|
Where did you get the parts? What are the steps?
|
14-05-2006, 11:28 AM | #4 | |
Guest
Posts: n/a
|
All parts can get from Sim Lim Tower....
Except : Hang on filter from LFS 6061 Aluminum cooling plate (for marine use) from hardware shop.. Quote:
|
|
22-05-2006, 01:02 PM | #5 | |
Guest
Posts: n/a
|
Is it any electronic shop?Or any specific shop you recomend.
Just tell them thermoelectric module Regards Quote:
|
|
22-05-2006, 01:37 PM | #6 | |
Guest
Posts: n/a
|
In SLT, i think there is only 1 shop selling peltier....
Basement 1 - entrance from the canal side, go down stair right hand side 1st shop... Just tell them u wanna buy peltier 1 side cold & 1 side hot .. For power supply unit, u have to take yr time to see which shop selling the cheapest................. Quote:
|
|
14-05-2006, 12:50 PM | #7 | |
Guest
Posts: n/a
|
Bro...Sis
Is not easy to guide step by step... Just need to sandwich it tied & not leakage... Quote:
|
|
15-05-2006, 12:50 PM | #8 |
Guest
Posts: n/a
|
suitable for 1.5ft tank?
|
15-05-2006, 12:57 PM | #9 | |
Guest
Posts: n/a
|
U not yet complete DIY yrs ah....?
Should be able to cool 1.5 x 1 x 1 ft tank... Quote:
|
|
14-05-2006, 11:23 AM | #10 | |
Guest
Posts: n/a
|
1. Heatsink with fan = $10
2. Peltier = $22 3. Aluminium cooling plate = $10 4. hang On Filter = $15 5. Car themostat = $30.00 - optional 6. PSU - $35 - used 7. PSU - $55 - New 8. Or find yr own cheapest PSU Quote:
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|