Dupla CO2 S Reactor

15-11-2004, 12:46 AM

Hi Guys!

I just got this CO2 reactor but had no clue as to the piping setup.

Both the in/outlet are 9/12mm and Eheim does not produce such sizes anymore.

Can anyone share your current setup for such CO2 reactor or any other reactors with similar hose size.

Thanks.

17-11-2004, 03:33 PM

It's not necessary to use Eheim tubes.

Take the joints down to a hardware store (depending on where you live) and ask for a suitable rubber tube. You'll be pleasantly surprised at the cost savings.

17-11-2004, 04:43 PM

Thanks. Will try that.

Kind Regards.

15-11-2004, 12:46 AM	#1
platyfanatic Guest Posts: n/a	Dupla CO2 S Reactor Hi Guys! I just got this CO2 reactor but had no clue as to the piping setup. Both the in/outlet are 9/12mm and Eheim does not produce such sizes anymore. Can anyone share your current setup for such CO2 reactor or any other reactors with similar hose size. Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

17-11-2004, 03:33 PM	#2
talev Guest Posts: n/a	It's not necessary to use Eheim tubes. Take the joints down to a hardware store (depending on where you live) and ask for a suitable rubber tube. You'll be pleasantly surprised at the cost savings.

17-11-2004, 04:43 PM	#3
platyfanatic Guest Posts: n/a	Thanks. Will try that. Kind Regards.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)